background image

This manual enables the safe and efficient handling of the sunshade stand. The manual 

is an integral part of the sunshade stand and must be stored at all times in the immediate 

vicinity of the sunshade so that it is available to persons who use the sunshade. Before be

-

ginning any activities, persons must first carefully read and understand this manual, as well 

as all safety information and markings. A basic requirement for safe handling is compliance 

with all safety information and instructions provided in this manual. In addition, the local 

accident prevention regulations and general safety regulations for the intended use and 

place of use of the sunshade stand apply. 

Illustrations in this manual show the sunshade stand Oasis Rolling Base 130R as an ex

-

ample. They are intended for general understanding and can differ from the actual model. 

The smaller models may differ in appearance from the depicted sunshade stand; however, 

the assembly steps and all information in this manual apply equally for all models, unless 

explicitly stated otherwise. Claims against NerTes GmbH (hereinafter „Manufacturer“) on 

the basis of the illustrations are not enforceable.

Limitation of liability

All information and notices in this manual were compiled taking into account the applicable 

standards and regulations, the state of the art and our many years of experience and 

knowledge. The manufacturer will assume no liability for damages due to:

 

Failure to comply with the manual

 

Non-intended use

 

Use by unauthorized persons

 

Unauthorized alterations or technical modifications

 

Use of non-authorized parts

Copyright

This manual is protected by copyright and is intended for internal use only. Dissemination 

to third parties, reproductions of any type or manner – also excerpts – and exploitation 

and/or communication of the content are not allowed without the written permission of the 

manufacturer, except for internal purposes. Infringements will result in liability for damages. 

All rights reserved.

 

 

 

 

 

Distributor for United States  

© NerTes GmbH   

 

 

Oasis Rolling Bases

Carl-Zeiss-Str. 2-4 

 

 

11748 MonteVista Rd.

47475 Kamp-Lintfort 

 

 

Clermont, FL 34711

Germany 

 

 

 

United States

Tel.: +49 (0) 2842 9498053  

 

Phone: 725-696-2747

Fax: +49 (0) 2842 9299948 

 

Email:[email protected]

E-Mail: [email protected] 

 

 

www.oasisrollingbases.com

Internet: www.nertes.de

10 Technical data

  

i

 

The exact model designation of your sunshade stand can be found on the base. 

Lift the casing on the assembled sunshade stand so you can see the designation.

Permissible pole diameters

Model

Permissible pole diameters

330R

45 to 68 mm (1.77 in to 2.68 in)

330R With QC2

50 mm (1.97in), 55 mm (2.17in),

Dimensions and weight

Model

Diameter with 

casing

Weight of the single 

weight segments

Total base 

weight 

260R

35,83 in

with plastic casing

approx. 44 lb

approx. 265 lb

330R

35,83 in

with plastic casing

approx. 55 lb 

approx. 330,7 lb

10  Technical Data

19

2

Summary of Contents for 330R With QC2











Reviews: