Oase ProfiClear Premium TF-XL, Operating Instructions Manual

Page: 73 / 444

- EN -
73
6.5.4
IE
: Interval of the extended cleaning time "Interval Extra Cleaning"
This menu is used to set the number of cleaning cycles after which an extended cleaning time
“Extra Cleaning” is performed.
The default setting is one extended cleaning time “Extra Cleaning” after 20 cleaning cycles.
Proceed as follows Information
1. Press
several times until
IE
appears
in the display.
To cancel and exit the menu: Either wait for 10 s or press or
.
2. Press
for 5 s until the cleaning time
is indicated in the display.
To cancel and exit the menu: Either wait for 5 s or press or .
3. Press
several times to change the
value.
• To change the value quickly: Hold down
the button.
• Adjustable range: 20 … 99 rinsing cycles
• Increment: 1
•
The number can only be changed upwards. Once the value 99 is
reached, the display returns to 20.
• Saving the set value: Wait for 5 s until the menu is automatically
exited.
•
Cancel without saving and exit the menu: Press or .
6.5.5
E7
: Pump status detection
The pump status detection signals whether the pump is operating properly via the
Er88
system
message. The status detection is activated in the default setting.
Proceed as follows Information
1. Press
several times until
E7
appears
in the display.
•
To cancel and exit the menu: Either wait for 10 s or press or
.
2. Keep
pressed for 5 s until the value
0 or 1 is indicated in the display.
• To cancel and exit the menu: Either wait for 5 s or press or
.
3. Press
to change the value.
Adjustable range: 0 or 1
• 0: The pump status detection is deactivated.
• 1: The pump status detection is activated.
•
Cancel without saving and exit the menu: Press or .