Oase Bitron Eco 120W, Commissioning

Page: 21 / 248

EN
21
Installation and connection
Operation with pool water or salt water
•
For operation with pool water or salt water, adhere to the following limits:
Type Pool water Salt water
pH value 7.2 … 7.6 7.5 … 8.5
Free chlorine 0.3 … 0.6 mg/l < 0.3 mg/l
Bound chlorine < 0.2 mg/l –
Chloride content < 200 mg/l –
Salt content – < 3.5 %
Water temperature +4 … +30°C +4 … +25°C
•
Pool water or salt water can impair the appearance of the unit. Such impairments are excluded
from the guarantee.
Distances to be adhered to
 A
•
Minimum safety distance between the unit and the water: 2 m.
•
Allow sufficient space for carrying out maintenance work.
–
Ensure that there is space of at least double the width of the casing for removing the unit
head.
Solo operation
 B
•
Only install the unit in the permitted positions. This ensures fault-free operation.
•
Take the required distances into consideration. (
→
Distances to be adhered to)
•
Use suitable fastening material for the type of ground. Ensure that the fastening means se-
curely hold the unit. Take the weight of the unit into consideration.
•
Fit a slide valve in the water supply upstream of the inlet of the unit if the unit is to be in-
stalled below the water level. This allows the water supply to be shut off for maintenance
work.