Oase BioTec Premium 80000 EGC, Operating Instructions Manual

Page: 51 / 320

- EN -
51
How to proceed:

M
1. Remove the container cover.
– The filter drum is stopped for safety reasons if the filter cover is lifted and
Er11
is indicated in the
display of the control system.
2. Switch off the filter pump.
3. Switch off the mains voltage (ensure that the control system is isolated).
4. Alter the position of the holder in the filter container (see table).
– Undo and remove both screws of the holder. Push the holder into the correct position and fasten
with both screws.
5. Fit the container cover.
6. Switch on the control system and filter pumps and check the function of the status detection.
Position of the status detection Triggering of the status detection at
5 Max. flow rate (12500 l/h) and the water runs over the inner cover
4 100 % water level
3
1) 75 % water level
2 50 % water level
1 25 % water level
1) Factory setting