Oase BioMaster 250, Operating Instructions Manual

Page: 21 / 204

- EN -
21
PRODUCT DESCRIPTION
Scope of delivery

B Suction unit, flow-out unit Quantity
1 Suction pipe 1
2 Hose 1
3 Flow-out pipe 2
4 Suction cup 5
5 Hose adapter, adjustable 2
6 Adapter, suction pipe 1
7 Suction basket 1
8 Terminal 5
9 Angle piece 1
10 Union nut 4
11 Short hose section as connecting piece
for flow-out pipes (3) 1
12 Water distributor 1
13 Cover cap 1
Intended use
Only use the product described in this manual as fol-
lows:
•
BioMaster 250/350/600/850 : Water filtering and
recirculation.
•
BioMaster Thermo 250/350/600/850 : Water heat-
ing, filtering and recirculation.
•
For operation with freshwater or saltwater.
•
Operate in accordance with instructions.
(→ Technical data)
The following restrictions apply to the unit:
•
Only use indoors and for aquaristic purposes in the
home (not for commercial use).
•
Only operate with water at a water temperature of
+4 °C to +35 °C.
Function description
Drawn in by a pump in the unit head, the water first
flows through the pre-filter then from the bottom to
the top through the superimposed layers of filter me-
dia. The water then flows back into the aquarium via
the flow-out pipe or water distributor.
Foam filters with different pore densities, and Hel-X
bio-elements serve as filter media.
In units with heater, the water is heated during its pas-
sage through the filter system.
ACCESSING THE UNIT
N O T E
The following applies to all units with heater:
•
Adhere to the rules for careful handling. (→ Careful
handling of the heater)
Careful handling of the heater
C A U T I O N
Hot surface!
Risk of burns when touching the glass bulb.
•
Switch off the heater and allow it to cool down be-
fore removing it from the water.
C A U T I O N
Risk of breaking the glass!
The glass bulb of the heater can break and cause cuts.
•
Take care when handling the heater.
•
Allow the heater to cool down first. Do not immerse
it in cold water or pour cold water over it.

A BioMaster, BioMaster Thermo
1 HeatUp 150: BioMaster Thermo 250
HeatUp 200: BioMaster Thermo 350
HeatUp 300: BioMaster Thermo 600
HeatUp 400: BioMaster Thermo 850
2 Operating instructions HeatUp
25/50/75/100/150/200/250/300/400
3 Holding ring for HeatUp assembly
4 Blind plug
5 Handle, when the handle is hinged down there are
two fasteners (10), locked
6 Unit head
7 Pre-filter with suction button
8 Connection unit with hose connectors, outlet and
inlet
9 Fastener
10 Container, filled with filter media
11 Operating instructions
BioMaster 250/350/600/850,
BioMaster Thermo 250/350/600/850
12 Rubber feet