34
P7.2 Selecting °C or °F
This meter lets you select between °C and °F units for
temperature readings.
From measurement mode
1.
Press the Mode key to select conductivity (TDS)
measurement mode.
2.
Press SET key to enter Set Up mode.
3.
Press the
▲
and
▼
keys to scroll through subgroups
until you view parameter P7.0.
See Figure 49
4.
Press the ENTER key two times to select parameter 7.2.
See Figure 51
5
. Press the
▲
and
▼
keys to toggle between °C and °F.
6
. Press the ENTER key to confirm selection and to proceed
to step 5 of P.7.3. Press the CAL/MEAS key twice to return
to measurement mode.
Notes
You can also switch between °C and °F in Program P3.2
(available from pH mode). If you switch between °C and °F in
conductivity/TDS mode, the meter will also switch in pH
mode.
P7.3 Selecting Automatic/Manual Temperature Compensation
This feature lets you select between Automatic Temperature
Compensation (ATC) and Manual Temperature Compensation
for conductivity (it lets you deactivate the temperature sensor
in the conductivity probe). Meter default is ATC.
From measurement mode
1.
Press the Mode key to select conductivity (TDS)
measurement mode.
2.
Press the SET key to enter Set Up mode.
3. Press the
▲
and
▼
keys to scroll through subgroups until
you view parameter P7.0.
See Figure 49
4.
Press the ENTER key three times to select parameter 7.3.
The upper display shows “ATC” and the lower display
shows “P7.3”.
See Figure 52
5
. Press the ENTER key again. The upper display shows
“ATC” and the lower display shows “YES” or “NO”.
See Figure 53
6.
Press the
▲
and
▼
keys to select the Automatic
Temperature Compensation on of off.
• YES = ATC on
• NO = ATC off (manual compensation)
7
. Press the ENTER key to confirm selection and to proceed
to step 5 of P7.4. Press the CAL/MEAS key twice to return
to measurement mode.
SETUP
mS
µ
S
ppt
ppm
Figure 49
C
SETUP
F
SETUP
Figure 51
ATC
SETUP
C
ATC
SETUP
C
Figure 53
ATC
SETUP
C
Figure 52
troubleshooting
electrode
care
measurement
calibration
starting up
introduction
set up
mode
return of
items
warranty
accessories
specifications
appendixes
