6
Electrode Holder Arm
The electrode holder is included in the same
box as the meter.
To attach the electrode holder to the meter:
1.
The electrode holder base attached to
the bottom of the meter comes in the ship-
ping position.
See Figure 3.
2.
Use a Phillips screwdriver to remove the
screw holding the electrode holder in ship-
ping position.
See Figure 3.
3.
Slide the electrode base away from the
meter until the second screw slot lines
up with the original screw hole. Use the
screw removed earlier to secure
electrode holder base into position.
See Figure 4.
4.
The electrode holder arm is reversible. If
desired, remove screw holding electrode
holder base and slide base out of
brackets. Slide base into brackets on oppo-
site side and replace screw.
See Figure 5.
Bottom of meter
Figure 3
Figure 4
Figure 5
Shipping position
Bottom of meter
Bottom of meter
troubleshooting
electrode
care
measurement
calibration
starting up
setup
mode
return of
items
warranty
accessories
specifications
appendixes