18
HOLD function
This feature lets you freeze your reading for a delayed obser-
vation. HOLD can be used any time when in MEAS mode.
1.
To hold a measurement, press the HOLD key while in
measurement mode. "HOLD" will appear on the
display.
See figure 23
2.
To release the held value, press HOLD again. Continue to
take measurements.
Taking measurements with READY indicator
selected on
If the READY indicator has been activated, the READY
annunciator lights when the reading is stable. Switch the
READY indicator on or off in Set up program P3.1—
see page 28 for directions.
Taking measurements with the auto endpoint feature
selected on
When a reading is stable for more than 5 seconds, the
auto endpoint feature will automatically “hold” the reading.
The “hold” indicator appears on the left side of the display.
Press the HOLD key to release the reading. Switch the
Auto endpoint feature on or off in Set up program P3.1—
see page 28 for directions.
ATC
READY
MEAS
HOLD
F
pH
Figure 23
troubleshooting
electrode
care
measurement
calibration
starting up
setup
mode
return of
items
warranty
accessories
specifications
appendixes