19
9. Simple Rectifying
Under normal weighing and zero-load state, keep pressing [MODE] for 3 seconds, the indicator
displays“‘0’00000” (the flashing‘0’is the selected digit, if don’t need to rectify, press [ENTER] to
withdraw). Load the rectification weights on the scale platform and input the weight value for the
indicator. Press [ENTER], the indicator displays “wait” and return to normal weighing state and
displays the rectification weight after several seconds, thus the rectification operation is completed.
Note: The simple rectifying must meet the following 2 conditions:
a. The
rectification error should be within
±20%Wc.
b. The
rectification weight
Wc
should comply with
Wmax 10%≤Wc≤Wmax
Wc refers to
rectification weight and
Wmax refers to Max. weighing.
For example: Simple rectifying to a 30kg scale (
rectification weights is 20kg
)
Under zero-load state, keep pressing [MODE] for about 3 seconds, the indicator displays“‘0’000.00”
(the flashing‘0’ at the first digit on the last left is the selected digit). Load 20kg rectification weights on
the scale platform, press [→] twice to select the digit-input place, the indicator displays 00‘0’0.00.
Press [↑] twice to input 00‘2’0.00 , and then press [ENTER] to confirm, at this time the indicator
displays “ wait ” and displays 20.00 after several seconds, thus the rectification operation is
completed.
10.
Information Prompt
a. OVER, which means the weighing value is over-load or short-load.
b. E32, which means the loaded weight is too little while processing arbitrary point calibration.
c. E33, which means the load cell output-signal is too low while calibrating the range.
d. E34, which means the loaded weight is too large while processing arbitrary point test.
e. NOZERO, which means the gross weight is not zero while entering simple rectifying.
f. Undo, which means the pressed keys should be loosed so that the indicator enters setting state.
g. LO-bAT, which means the power capacity of the built-in battery has fully been consumed, at this time
you should charge it at once.
