10
To insert the battery
Line up the battery’s exposed copper contacts with the connectors inside the
battery compartment. Insert the contact’s side of the battery first and then gently
push the battery into place. Replace the back cover.
Charging the battery
Before you start using your Xda Serra, you’ll need to fully charge the battery.
Charge it by plugging in the AC adapter plug to an electrical outlet. Plug the USB
end to the sync connector port at the bottom of your Xda Serra. The battery will
be fully charged after about 3 hours of charging.
9
To install a microSD card
Insert the microSD™ card into the slot with its gold contacts facing down.
To remove the microSD card, press it to eject it from the slot.
Note:
microSD card is not included in the box.
