4 Mode
4.2 Mode - TIME
screeneye
x
8 / 18
exclusively receives data from your own sensors, and you can go
close to other sensors without interference.
Move away (40 m) from other sensors while the
screen
eye x is trying
to pair with your sensor for the first time. Bring your sensor within
range (3 m) of the
screen
eye x.
Press the front
button and choose “PAIR”. Open the menu “PAIR” by
pressing the middle button.
YES
is blinking, choose “yes” or “no” by pressing the front button and
confirm with the middle button. Pairing is blinking for 15 seconds.
After that it is shown which device has been paired. (SPD = Foot pod;
HRM = Heart Rate Monitor; Radar = multisport sensor)
“Pair” appears
and the sensor is paired.
4.1.4
VIEW
Press the front button or the rear button and choose
“VIEW”. Open
the menu “VIEW” by pressing the middle button. The current mode is
blinking. Switch between “SIMPLE” and “EXPERT” by pressing the
front button and confirm your choice by pressing the middle button.
The following options are only accessible in EXPERT-Mode.
Coach-Mode (chapter 4.3.2)
Detailed values of a single lap (chapter 4.4.2 Sessions)
Access to calibration factor and A.Lap
at the unit “setting dialog”
The expert view is automatically activated if a workout is transferred
with the
training
lab software to the
screen
eye x (chapter 5.2.3
Workout editor).
4.2 Mode - TIME
Press the middle button for 5 seconds to activate the display.
“TIME”
appears, and within 3 seconds the current time is shown.
Navigate with the front or rear button t
o “TIME” and the current time is
shown within 3 seconds.
The time mode is invoked automatically after a minute of inactivity
from any other mode (except from the “SPORT” mode).
4.3 Mode - SPORT
Press the front button or the rear button
and choose “SPORT”. Open
the menu “SPORT” by pressing the middle button.
Pair