4 Mode
4.4 Mode - DATA
11 / 18
screeneye
x
Each training unit recorded with the coach mode is stored as a new
run. See chapter 4.4.2 Sessions
If the device runs out of memory, the coach mode is stopped.
The coach mode will be locked if the stopwatch is running and when
battery or memory are low.
4.4 Mode - DATA
DATA
TOTALS
SESSIONS
CLEAR
Front/
Rear
Front/
Rear
Front/Rear
Middle
Fig. 10 Menu DATA
4.4.1
Totals
Shows a total summary of all training units.
Press the front or the rear button to scroll through the following
values. Press the middle button to leave the menu.
Shows the total distance covered.
Shows the total training time.
Displays the total calories burned during all training units.
Displays the total amount of fat (in gram) burned during all training
units.
4.4.2
Sessions
Each training unit recorded with the stopwatch is stored as a single
run “R1, R2, …”. The date of this run is displayed on the right side.
Scroll through the stored training units by pressing the front or rear
button. Call the desired training unit by pressing the middle button.
Depending on the temperature setting in chapter 4.1.2 Setting - UNIT
the date format of the record is displayed in a different way. If degree
“C” is set, the date format will be (d)d.mm. If degree “F” is set, it will
be (m)m.dd
SIMPLE View
DST
T
CAL
FAT
R1, R2, R3, …, Rx
