40
Appendix A
Specifications
Fiber cladding diameter
1,2
:
230-1000 µm
Fiber coating diameter
1,2
:
250-1500 µm
Applicable fiber type:
Single circular solid silica fiber
Cleave angle:
Typical < 0.5°
Cleave method:
Tension and scribe
Number of cleave pos./blade:
27
PC interface:
RS-232, D-sub 9-pin male (Null-modem)
Power
3
:
12V DC, 1.25A (provided by external power supply)
Power inlet:
2.1/5.5 mm barrel jack. Center negative polarity, reverse-polarity protection.
Compressed air
3,4
:
5-8 bar (72.5
–
116 psi)
Air inlet:
4 mm instant push-in fitting
Operating temperature range:
0°C ~ 40°C
Storage temperature range:
-10°C ~ 50°C
Relative humidity:
5% ~ 95% (non-condensing)
Dimensions:
(WxDxH) 179x144x115 mm (7.0x5.7x4.5 in)
Weight:
2.4 kg (5.3 lb)
1
Requires specific fiber handling parts based on fiber size to be cleaved and version of AUTOCLEAVER
TM
. See Appendix
B.
2
When using linear
inserts with the AUTOCLEAVER LDF™
- Fujikura or Fitel Edition, the upper limit of fiber cladding is
less than 700 µm and coating less than 1000 µm
3
Power supply and air supply not included in standard delivery kit.
4
Required air pressure may vary depending on fiber dimension to be cleaved etc.
