Perimeter Intruder Detection System
BOTTOM PANEL
1
DC Inlet
Connect to DC Adapter or Supply. The NS200M can take 5Vdc, 1A to power
the system.
1
DATA Transmission Port
In
s
ta
lla
tio
n
–
N
S
C
o
n
tr
o
lle
r
2
3
4
5
Power Tamper LED warning
LED indicates warning when the DC Power is reversely connected.
2
6
5
Dry Contact
INTRUDER
There are 2 sets of dry contacts in this row. It is labeled “NO1/CC1” to “NO2/CC2”
to trigger other devices of Zone 1 to 2 respectively if there is a presence of intruder
in one of the zone.
TAMPER
There are 2 sets of dry contacts in this row. It is labeled “TO1/TC1” to “TO2 / TC2”
to trigger other devices of Zone 1 to 2 respectively if there is a tampering in any of
the zones. A check is required to see if there is a disconnection or breach in any of
the connection or fibers outfield.
ACCESS CONTROL
Activate Entrance Channel Setting for access control use.
4
DATA Transmission Port
The controller output uses a RS-232 interface. It allows the user to
communicate and calibrate the settings with a computer. After initial setting, it
can be disconnected to allow independent operation.
3
N
S
C
o
n
tr
o
lle
r
USB 2.0 to RS232 Cable.