Perimeter Intruder Detection System
FRONT PANEL
In
s
ta
lla
tio
n
–
N
S
C
o
n
tr
o
lle
r
A
B
4
TAMPER LED Indicator
When the LED is GREEN, it indicates
normal operation and there is no breach in
the
fiber connection. It also signifies that
the controller is ready for Operation. When
LED is RED, it indicates that there is a
breach somewhere in the system. This may
be tampered or damaged by intruders.
Thorough inspection is required at the
respective zone or contact your dealers and
supplier for an
inspection. User can also
refer to the operational software to detect if
tampering occurs at the Leading Fiber or
S e n s i n g F i b e r . U s e r c a n r e f e r t o
“ I n s t a l l a t i o n – S y s t e m S e t t i n g a n d
Calibration” for more details required.
Necessary action should be carried out
while the respective TO/TC contacts will
also be activated accordingly less than 5S.
A
INTRUDER LED Indicator
When the LED is no lighting, it indicates
normal operation and that there is no
intruder in the perimeter or the detection
zones. When the LED is RED and blinking,
it indicates that is a Warning Signal. It also
indicates that there are some unknown
project approached or touched detection
area. When the LED is RED in any zone, it
indicates that there is a intrusion in that
detection zone. Necessary action should
be carried out while the respective NO/CC
contacts will also be activated accordingly
at real time.
B
N
S
C
o
n
tr
o
lle
r