background image

Freedom Designs, Inc.

Freedom Designs, Inc.

5

NXT

Generation NEXT

TM

W

W

A

A

R

R
N

N

II

N

N

G

G

!

!

Assistance For the Rider

:

Everyone who helps you needs to read and follow all warnings and instructions 
that apply.

For Attendants

Work with the rider’s doctor, nurse or therapist to learn safe methods best suited 
to your abilities and those of the rider.
Tell the rider what you plan to do and explain what you expect the rider to do. 
This will put the rider at ease and reduce the risk of an accident
Make sure the chair has push handles. They provide secure points for you to 
hold the rear of the chair to prevent a fall or tip-over. Check to make sure push 
handle grips will not rotate or slip off.
To prevent injury to your back, use good posture and proper body mechanics. 
When you lift or support the rider, bend your knees slightly and keep your back 
as straight as you can.
Remind the rider to lean back when you tilt the chair backward.
When you descend a curb or single step, slowly lower the chair in one easy 
movement. Do not let the chair drop the last few inches to the ground. This may 
damage the chair or injure the rider.

WARNING: FALLS & TIP-OVERS

Center of Balance

The point where this chair will tip forward, back, or to the side depends on its 
center of balance and stability. How your chair is setup, the options you select, 
and the changes you make affect the risk of fall or tip-over.
1.  The most important adjustments are:
      a. The position of the rear wheels. The more you move the rear  wheels  
 

   forward, the more likely your chair will tip over backward. 

2.   The center of balance is also affected by:
 

a.  A change in setup of your chair, including:

 

 

1.  The distance between the rear wheels.

 

 

2.  The seat height, seat angle and position on frame.

 

 

3.  The backrest angle.

 

b.  A change in your body position, posture or weight distribution.

 

c.  The use of a back pack or other options, and the amount of added  

  weight.
3.   To reduce the risk of an accident:
 

a.  Consult your doctor, nurse, or therapist to 

fi

 nd out what axle and caster 

         

position is best for you.

 

b.  Consult your authorized Freedom Designs, Inc. provider BEFORE   

  you 

modify or adjust this chair. Be aware that you may need to make  

 

 

other changes to correct the center of balance.

 

c.  Have someone help you until you know the balance points of you chair  

 

 

and how to avoid a tip-over.

 

d.  Use anti-tip tubes.

Warning: 

Falls & Tip Overs

!

!

If you fail to heed these warnings, damage to your chair, a fall, tip-over, or 
loss of control may occur and cause severe injury to the rider or others.

Summary of Contents for Folding









































Reviews: