Freedom Designs, Inc.
Freedom Designs, Inc.
24
NXT
Generation NEXT
TM
Flip-up Individual Footplates
The
NXT
is shipped with individual
fl
ip-up
footplates attached or a solid footboard
unattached. Adjustment of the individual
fl
ip-up footplates are as follows:
To adjust the height of the footplate :
1. Remove the nylon lock nut on the back
side of the hanger. Place the footplate
at the desired height. Insert the screws
through
holes in the hanger tube, install
lock nut and tighten securely.
To adjust the angle of the
fl
ip-up footplate
2. Loosen the screws on bottom of the
footplate.
Set the footplate at the desired angle
and
re-tighten.
To adjust the depth of the
fl
ip-up footplate
3. Loosen and remove the screws on top
of the footplate. Align the holes in the
footplate with holes in the clamp at the
desired depth install the screws and
tighten.
To
fl
ip the footplate
4. The individual footplates easily
fl
ip by
lifting underneath the footplate to
fl
ip
up or push down on the footplate to
fl
ip down.
Main Frame
