background image

Freedom Designs, Inc.

Freedom Designs, Inc.

37

NXT

Generation NEXT

TM

Freedom Designs, Inc. Limited Warranty

PLEASE NOTE:  THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH U.S. FEDERAL 
LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.  THIS WARRANTY IS 
EXTENDED ONLY TO THE ORIGINAL PURCHASER/USER WHO PURCHASES THIS PRODUCT WHEN 
NEW AND UNUSED DIRECTLY FROM FREEDOM DESIGNS OR AN AUTHORIZED DEALER OR 
DISTRIBUTOR.  THIS WARRANTY GIVES SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER 
LEGAL RIGHTS WHICH VARY FROM STATE TO STATE, OR COUNTRY TO COUNTRY.

Limited Warranty – USA: 

 All Freedom Designs’ wheelchair frames, quick release axles and hardware are warranted 

against defects in material and workmanship for 

fi

 ve (5) years from the date of purchase. All other manufactured and 

distributed parts and components (including frame components, axle plates, armrests and backrests) are warranted 
for one (1) year from said purchase date.  There is no warranty for tires, tubes, and push handle grips. If within such 
warranty periods any product component eligible for coverage under this warranty shall be proven to be defective, 
Freedom Designs will, at its option, either replace or repair the product with new or refurbished product components, 
or will supply the original purchaser with replacement product components, which may be either new or refurbished.  
Freedom Designs’ sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or 
replacement.   This warranty does not include any labor or shipping charges incurred in replacement part installation or 
repair.  Moreover, the warranty period of the repaired or replaced product component shall terminate with the termination 
of the warranty period for the original product component Freedom Designs’ sole obligation and your exclusive remedy 
under this warranty shall be limited to such repair and/or replacement.

  

Limited Warranty - International: 

 All Freedom Designs’ wheelchair frames & quick release axles are warranted against 

defects in material and workmanship for 

fi

 ve (5) years from the date of purchase. All other manufactured and distributed 

parts and components (including frame components, axle plates, armrests and backrests) are warranted for one (1) year 
from said purchase date. All hardware is warranted for two (2) years after the date of purchase.  There is no warranty for 
tires, tubes, and push handle grips.  If within such warranty periods any product component eligible for coverage under 
this warranty shall be proven to be defective, Freedom Designs will, at its option, either repair or replace the product with 
new or refurbished product components, or will supply the original purchaser with replacement product components, 
which may be either new or refurbished. Freedom Designs’ sole obligation and your exclusive remedy under this warranty 
shall be limited to such repair and/or replacement.   This warranty does not include any labor or shipping charges incurred 
in replacement part installation or repair. Moreover, the warranty period of the repaired or replaced product component 
shall terminate with the termination of the warranty period for the original product component. Freedom Designs’ sole 
obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement.

Limitations & Exclusions – USA & International:

  The foregoing limited warranties shall not apply to:  Tires, tubes and 

push handle grips; Serial numbered products if the serial number has been removed or defaced; Products subjected 
to negligence, accident, improper operation, maintenance, or storage; Products modi

fi

 ed without Freedom Designs’ 

express written consent including, but not limited to, modi

fi

 cation through the use of  unauthorized parts or attachments; 

Products damaged by reason of repairs made to any component without the speci

fi

 c consent of Freedom Designs,  or to  

products damaged by circumstances beyond Freedom Designs’ control; Problems arising from normal wear or failure to 
adhere to these instructions; and with any such warranty eligibility  evaluation to be solely determined by Freedom Designs;.

THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES 
WHATSOEVER, WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND THE SOLE REMEDY FOR 
VIOLATIONS OF ANY WARRANTY WHATSOEVER SHALL BE LIMITED TO REPAIR OR REPLACEMENT 
OF THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN.  THE APPLICATION 
OF ANY IMPLIED WARRANTY WHATSOEVER SHALL NOT EXTEND BEYOND THE DURATION OF THE 
EXPRESS WARRANTY PROVIDED HEREIN. FREEDOM DESIGNS SHALL NOT BE LIABLE FOR ANY 
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.  THESE WARRANTIES SHALL BE 
EXTENDED TO COMPLY WITH STATE PROVINCIAL LAWS AND REQUIREMENTS.
Returns:

  An authorization for return must be acquired by an established Freedom Designs, Inc. dealer/distributor 

before Freedom Designs will accept returned items.  The dealer must return items to Freedom Designs, 2241 N. 
Madera Rd, Simi Valley, CA 93065 USA with freight pre-paid and fully insured with the R.A. # issued by customer 
service marked on the outside of the box.  All returns must be received within 45 days of issuance of the R.A. #.  
Returns are subject to examination at the discretion of Freedom Designs and may be subject to a 25% restocking 
fee.  Custom fabricated products are non-returnable.

Warranty

Summary of Contents for Folding









































Reviews: