8
THE FIRST TIME USING THIS RECEIVER
Scanning Digital Channels… (AUTO INSTALLATION)
When using the Set Top Box for the first time you will be guided through the Channel Scanning process
in order to easily configure the Set Top Box to your personal setup.
When the STB is powered ON from your
mains electricity supply, it will display the
NXT
DIGITAL Splash Screen.
A pop-up will come on the screen after the
Set Top Box has booted up. Check that your
cable is properly connected to the Set Top
Box (see above) and press OK. Your Set
Top Box will automatically start to look for
available channels.
Do not press any button until the Scanning
is completed and a result message appears.
If this fails please check the connection and
try again. If it fails again you may want to
go to menu and use the manual installation
procedure (see next page).
