6
PREPARATION OF REMOTE CONTROL
OPERATION SCOPE OF THE REMOTE CONTROL
PRECAUTIONS ABOUT BATTERIES
1.
Open the battery cover.
2.
Insert the batteries in the correct direction. Please ensure that the anode and cathode ends of the
battery are corresponding to the polarity indicated in the remote control.
3.
Replace the battery cover.
Point the remote control towards the Set Top Box in order to
control the apparatus, ensuring that the Set Top Box is not
obstructed in any way.
1.
Distance: the remote control will work up to seven meters
from the Set Top Box.
2.
Angle: The remote control will work up to 30 degrees right
or left of the Set Top Box panel.
Improper use of batteries may cause corrosion or fluid leakage. Please observe the following
instructions for the safe use of batteries.
1.
Insert the batteries taking care to ensure that they are facing the correct way.
2.
Never leave dead batteries in the remote control.
3.
Remove batteries from the remote controller if it is not going to be used for an extended period
of time
4.
Do not attempt to disassemble, short-circuit, heat, recharge or throw the batteries into any fire
source if even if they are not working.
5.
Do not use new batteries and old ones together. Use batteries of the same type together.
6.
Wipe away any electrolyte fluid that may have leaked into the remote controller before
inserting new batteries.
