Symphony SoundBite Demo User’s Guide
12
Freescale
Semiconductor
4)
Launch the Debug configuration created above by selecting Run > Debug… and selecting it from the list under
Freescale 56371. Alternatively, if the configuration has previously been used, it may appear under the Run >
Debug History menu.
5)
In the Registers tab, expand the core-PCU register set. Change the PC register to the start address noted in Step 2,
which is the start address of the EEPROM programming routine.
Note that the default number of words to store in EEPROM is 0x450, so if the start address is greater than this, the
programming routine must be modified and the application rebuilt. See the project file sb_eeprogram.asm and
refer to the Symphony SoundBite Assembly Project Template Project document for more information.
6)
Run the application. The LEDs should begin to flash and then stop flashing as described in section 3.1.