manualshive.com logo in svg

NXP Semiconductors SMAC, Reference Manual, Page: 5 / 42

Share
Download
NXP Semiconductors SMAC Reference Manual Download Page 5

Simple Media Access Controller (SMAC) for the HCS08 Reference Manual, Rev. 2.0

Freescale Semiconductor

v

 

About This Book

This guide provides a detailed description of the Freescale Simple Media Access Controller (SMAC) for 
the HCS08 MCU based devices.

This document replaces the SMAC User’s Guide currently at Rev 1.5.

Audience

This document is intended for application developers 802.15.4 PHY wireless applications. The latest 
version of the Freescale SMAC for the HCS08 is incorporated into the Freescale BeeKit Wireless 
Connectivity Toolkit.

Organization

This document is organized into the following chapters.
Chapter 1

SMAC Introduction 

— This chapter introduces SMAC features and 

functionality.

Chapter 2

Software Architecture 

— This chapter describes SMAC software architecture.

Chapter 3

Primitives 

— This chapter provides a detailed description of SMAC primitives.

Revision History

The following table summarizes revisions to this document since the previous release (Rev. 1.0).

Revision History

Location

Revision

Throughout

Removed MC13219x references.

Throughout

Added information for MC13234 
devices.

Chapter 1

Removed OTA, SNET, Low Power 
Bell, and Accelerometer references

Chapter 3

Removed UseExternalClock, 
UseMCUClock, and MCUInit sections.

Summary of Contents for SMAC











































Reviews:

No comments