NXP Semiconductors SMAC Reference Manual Download Page 42 | Manualshive

Page: 42 / 42

NXP Semiconductors SMAC Reference Manual Download Page 42

Primitives

Simple Media Access Controller (SMAC) for the HCS08 Reference Manual, Rev. 2.0

3-22

Freescale Semiconductor

3.1.30

MLMEScanComfirm

This function is executed after scan operation has finished.

Prototype

void MLMEScanComfirm(channels_t);

Arguments

channels_t

If an ED scan was requested, it represents the cleanest channel or the one with less energy detected. If a
CCA scan was requested this argument is meaningless. Format is the

channels_t

type.

Returns

Nothing

Usage

Use this function to acknowledge that the scan operation has finished and the scan stored values are valid.

NOTE

This function is executed as part of an interrupt service routine, as a result
follow all the recommendations for interrupt execution timing and context.

3.1.31

MLMEWakeComfirm

This function is executed after Wake operation has finished.

Prototype

void MLMEWakeComfirm(void);

Arguments

Nothing

Returns

Nothing

Usage

Use this function to acknowledge that the transceiver has awake.

NOTE

This function is executed as part of an interrupt service routine, as a result
follow all the recommendations for interrupt execution timing and context.

«
...
40
41
42

Summary of Contents for SMAC











































Reviews:

No comments