manualshive.com logo in svg

NXP Semiconductors SMAC, Reference Manual, Page: 41 / 42

Share
Download
NXP Semiconductors SMAC Reference Manual Download Page 41

Primitives

Simple Media Access Controller (SMAC) for the HCS08 Reference Manual, Rev. 2.0

Freescale Semiconductor

3-21

 

3.1.28

MCPSDataIndication

This function is executed when a reception operation finishes, this is a callback function that the 
application should implement.

Prototype

void MCPSDataIndication(rxPacket_t *);

Arguments

rxPacket_t*

A pointer to the received packet

Returns

Nothing

Usage

This callback function must be executed once the reception operation is completed; successful or not. Use 
the 

rxStatus

 element of 

rxPacket_t

 structure to define the application execution path.

NOTE

This function is executed as part of an interrupt service routine, as a result 
follow all the recommendations for interrupt execution timing and context.

3.1.29

MLMEResetIndication

This function is executed after a reset has been commanded and when the transceiver indicates the reset 
has finished.

Prototype

void MLMEResetIndication(void);

Arguments

Nothing

Returns

Nothing

Usage

Use this function to acknowledge that the transceiver has been reset.

NOTE

This function is executed as part of an interrupt service routine, as a result 
follow all the recommendations for interrupt execution timing and context.

Summary of Contents for SMAC











































Reviews:

No comments