manualshive.com logo in svg

NXP Semiconductors SMAC, Reference Manual, Page: 40 / 42

Share
Download
NXP Semiconductors SMAC Reference Manual Download Page 40

Primitives

Simple Media Access Controller (SMAC) for the HCS08 Reference Manual, Rev. 2.0

3-20

Freescale Semiconductor

 

3.1.26

SMACEnableInterrupts

This function enables the interrupts that are used by SMAC (see 

Section 3.1.25, 

“SMACDisableInterrupts

”).

Prototype

void SMACEnableInterrupts(void);

Arguments

None

Returns

Nothing

Usage

Call this function to allow SMAC to enable interrupts.

3.1.27

MCPSDataComfirm

This function is executed when a transmission operation finishes, this is a callback function that the 
application should implement.

Prototype

void MCPSDataComfirm(txStatus_t);

Arguments

txStatus_t

This indicates the status of the transmission operation

Returns

Nothing

Usage

This callback function must be executed once a transmission operation is completed; successful or not. Use 

txStatus_t

 argument to define the application execution path.

NOTE

This function is executed as part of an interrupt service routine, as a result 
follow all the recommendations for interrupt execution timing and context.

Summary of Contents for SMAC











































Reviews:

No comments