manualshive.com logo in svg

NXP Semiconductors SLN-LOCAL2-IOT, User Manual

Share
Download
NXP Semiconductors SLN-LOCAL2-IOT User Manual Download Page 3

7.1.2.2 Architecture..................................................................................................................................46
7.1.2.3 Language model.......................................................................................................................... 47
7.1.2.4 Inference engine.......................................................................................................................... 48

7.1.3 ASR configuration..................................................................................................................... 49

7.1.3.1 Languages................................................................................................................................... 49
7.1.3.2 Installation of languages and inference engines..........................................................................49

7.1.4 ASR session control..................................................................................................................50

7.1.4.1 Follow-up mode........................................................................................................................... 50
7.1.4.2 Timeout........................................................................................................................................51
7.1.4.3 Push-to-Talk (PTT) mode............................................................................................................ 51

7.2 Acoustic modification...............................................................................................................51

7.2.1 Changing microphone configuration......................................................................................... 51

7.2.2 Changing the post gain............................................................................................................. 52

7.2.3 Changing the pre-processed microphone gain......................................................................... 52

Chapter 8 Security architecture........................................................................... 54

8.1 Application chain of trust......................................................................................................... 54

8.2 FICA and image verification.................................................................................................... 54

8.3 Image Certificate Authority (CA) and application certificates.................................................. 55

Chapter 9 Bootloader...........................................................................................56

9.1 Application BIN file generation................................................................................................ 56

9.2 USB Mass Storage Device (MSD) update...............................................................................60

9.3 Over-the-Air (OTA) and Over-the-Wire (OTW) updates..........................................................61

9.4 Transfers................................................................................................................................. 61

9.4.1 JSON messages....................................................................................................................... 62

9.4.1.1 Start request................................................................................................................................ 62
9.4.1.2 Block request............................................................................................................................... 63
9.4.1.3 Stop request.................................................................................................................................63
9.4.1.4 Activate image request................................................................................................................ 63
9.4.1.5 Start self-test request...................................................................................................................63
9.4.1.6 Clean request...............................................................................................................................64
9.4.1.7 Response format..........................................................................................................................64

9.5 Testing OTA/OTW updates..................................................................................................... 64

9.5.1 OTA setup................................................................................................................................. 64

9.5.2 OTW setup................................................................................................................................ 64

9.6 Running the test script.............................................................................................................65

Chapter 10 Filesystem......................................................................................... 68

10.1 Generating filesystem-compatible files..................................................................................68

10.2 Generating new audio playback files.....................................................................................68

Chapter 11 Automated manufacturing tools........................................................ 70

11.1 Introduction............................................................................................................................70

11.1.1 About Ivaldi............................................................................................................................. 70

11.1.2 Download the package............................................................................................................70

11.1.3 Requirements..........................................................................................................................70

11.1.4 Platform configuration............................................................................................................. 70

11.1.5 Boot programming modes and security features.................................................................... 71

11.2 NXP application image signing tool.......................................................................................71

11.2.1 Generating signing entity........................................................................................................ 71

NXP Semiconductors

Contents

SLN-LOCAL2-IOT Developer’s Guide, Rev. 0, 19 April 2021

User's Guide

3 / 87

Summary of Contents for SLN-LOCAL2-IOT
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands