manualshive.com logo in svg

NXP Semiconductors SLN-LOCAL2-IOT, User Manual

Share
Download
NXP Semiconductors SLN-LOCAL2-IOT User Manual Download Page 20

Figure 8. MCUXpresso SDK build for SLN-LOCAL2-IOT

 

You may be asked to log into the NXP webpage to access the MCUXpresso SDK builder.

  NOTE  

In 

Figure 8

, there are three red boxes. Select the toolchain support, the host OS you are developing on, and the embedded

real-time operating system. Click the “Select All” button to include all the relevant software packages and then click the “Download
SDK” button.

4.2.2 Import SLN-LOCAL2-IOT SDK

Before building the SLN-LOCAL2-IOT SDK example projects, the target SDK must be imported into the MCUXpresso IDE by
dragging and dropping the target SDK archive into the “Installed SDKs” window in the MCUXpresso IDE. 

Figure 9

 shows the

pop-up window which asks for confirmation (Click "OK").
When the package is imported, it will be displayed in the list of installed SDKs. 

Figure 10

 shows the installed SDKs in the

MCUXpresso IDE.

Figure 9. MCUXpresso SDK import confirmation window

NXP Semiconductors

Getting started with MCUXpresso Tool Suite

SLN-LOCAL2-IOT Developer’s Guide, Rev. 0, 19 April 2021

User's Guide

20 / 87

Summary of Contents for SLN-LOCAL2-IOT
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands