Figure 3. High-level software architecture
3.3 Device memory map
To understand the various pieces of the system, see the memory map (
) that NXP developed for this application. There
are many components required in the system to successfully boot and execute an application.
Table 4. Device memory map
Name
Start address
End address
Description
Boot Config Region
0x6000_0000
0x6000_0FFF
Used for XIP and setting up flash
IVT
0x6000_1000
0x6000_1FFF
Vector table
Bootstrap
0x6000_2000
0x6003_FFFF
Bootloader
0x6004_0000
0x601F_FFFF
Not Used
0x6020_0000
0x602F_FFFF
Not used
Application Bank A
0x6030_0000
0x60CF_FFFF
Application Bank B
0x60D0_0000
0x616F_FFFF
Table continues on the next page...
NXP Semiconductors
Introduction
SLN-LOCAL2-IOT Developer’s Guide, Rev. 0, 19 April 2021
User's Guide
13 / 87
