Check out our reference designs at
www.nxp.com/RFcollection
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their
respective owners. © 2021 NXP B.V.
Document Number: MRF300ANEKITQRC Rev. 0
Assembly notes:
• Mount all SMT devices on PCB (device values are dependent on frequency
of operation).
• Make sure no solder blobs are on non-component side of board.
• Trim leads of MRF300AN to shoulder.
• Mount board onto baseplate.
• Mount device using thermal grease, solder only after tightening device
mounting screw.
• Mount connectors and solder center pins.
• Connect power wires
