Cutting and removing J11 pin 1 of the CLEV6630ARD avoids a collision with another pin of the OM-SE050ARD during their
stack in later steps.
Figure 56. CLEV6630ARD J11 pin 1 collision
7.6 Enabling NFC functionality
By default, the host project has the NFC functionality disabled, as shown in the following macro:
CLEV663_ENABLE=0
This is done intentionally to simplify the platform connection with your Azure IoT Central Application before assembling
the platform.
To enable NFC, compile and program the host project with CLEV663_ENABLE=1, as shown below:
1. Select the host project in the project explorer, right-click it and navigate to "Properties".
2. C/C++ build
3. Settings
4. Preprocessor
5. Set CLEV663_ENABLE=1.
6. Apply the changes.
7. Program the host project one more time, enabling the NFC board.
NXP Semiconductors
Board setup, wiring, and assembly
NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022
User Guide
41 / 64
