1. Go to the IDE’s "Quickstart" panel and click "Import projects from file system…" (1). Specify the address of the Meter
project and click "Finish" (3).
Figure 47. Importing KM3x EVSE project
2. Now the project is visible in the workspace. Click the “Build” button in the MCUXpresso "Quickstart" panel to compile the
project. Check that the project build finished successfully and without errors in the MCUXpresso console.
Figure 48. Building KM3x EVSE project
3. Flash the project into the TWR-KM3x board. The easiest way to program the board and verify that the program
executes properly is to run a debug session. Connect the TWR board Debug Access Port (DAP) to a PC via USB.
NXP Semiconductors
Board setup, wiring, and assembly
NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022
User Guide
36 / 64
