Table 5. CLEV6630ARD setup (continued)
Pin to cut and remove
Pin function
Reason
Workaround
nPDOWN conflicts with
ENET_RST on J22 pin P6 of
the i.MX RT106x.
CLC6630ARD J6 pin 6 and J7
pin 14.
This will reconnect the
nPDOWN pin with the
i.MX RT106x.
1. Proceed to remove and cut J11 P1, J12 P8, and J12 P6.
Figure 54. Pins to remove on the CLEV6630ARD board
2. Use two jumper cables to connect J6 P5 to J7 P16 and J6 P6 to J7 P14. This will reconnect the IRQ and nPDOWN
pins, which are necessary for the CLR6630 IC operation, to other pins.
Figure 55. Jumper connection
NXP Semiconductors
Board setup, wiring, and assembly
NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022
User Guide
40 / 64
