3
4. OPERATION
3. SPECIFICATION
Input voltage:
220-240V ~ 50/60Hz
Rated voltage outgoing: 6V/12V
Ambient temperature:
0°C to 40°C
Charging battery types:
- 6V lead acid battery 1,2Ah-14Ah
- 12V lead acid battery 1,2Ah-120Ah
- LFP 6.4V: to 1.2Ah to 14Ah
12.8V: to 1.2Ah to 120Ah
Rated power:
60W
Rated output current:
0.8A/3.8A
Housing protection type: IP65
A-1. Connecting Anderson connector
1.
Connect the charger connector to the battery connector
2.
Connect the mains cable 13 of the charger to the mains socket
3.
The battery voltage display 9 shows the current battery voltage
A-2. Connecting clamps
1.
Connect the «+» pole clamp (red) 14 of the charger to the «+» pole of the battery
2.
Connect the «-» pole clamp (black) 15 to the «-» pole of the battery
3.
Connect the mains cable 13 of the charger to the mains socket
4.
The battery voltage display 9 shows the current battery voltage.
Should the connection of the clamps be swapped, the LED
«reverse connection»
lights up 5
B. Disconnect
1.
Disconnect the appliance from the mains supply
2.
remove the connector from the battery
C. Measuring stand by / battery voltage
After connection to the grid, the appliance is on Standby. The standby display 6 lights up. When the clamps
are connected, the battery voltage is shown in the LCD (voltage display 9). The segments of the condition
display 8 are empty.
If the voltage is below 3,8V or above 15V, the battery will not be charged. Th display briefly shows the
error
message «Err»
. The appliance goes on stand by.
6V battery:
If the voltage range of the battery is measured as between 3.7-7.3V, only programme 1 can
be selected.
12V batteries:
if a battery is recognized in the critical voltage range of between 7.3-10.5V, the ap-
pliancechecks wether a fully charged 6V battery, or a discharged 12V battery is present. After pressing the
programme selection button 10 to select a programme, the appliance carries out a control measurement
for about 90 sec.
The display shows:
If after about 90 sec. between 7.3-7.5V are detected, a 12V battery is defective. The appliance goes on
standby.
