Page 3 of 14
888.901.3633 | +44 (0) 208 977 6614
www.nvtphybridge.com
Copyright © 2017 NVT Phybridge
2017/11
•
Transmit 10/100 BaseT Full Duplex Ethernet up to 1,000ft (305m)* over 4-pair cat5;
750ft (228m) over 18/2 (or similar 2-wire cable); 500ft (150m) over Shielded Twisted-
Pair
•
Powers PoE entry stations (or other PoE, PoE+, or High Power devices), up to 60
watts*
•
55VDC is distributed over 2-wire cable to all connected IP devices
•
One NVT Eo2TM transceiver at the network-end can support multiple remote
Eo2TM transceivers and connected devices
•
Up to four Eo2TM transceivers can be rack mounted on an NV-RMEC16U-90
Eo2TM Rack Mount Tray Kit, connecting up to 16 entry stations or contact closures
•
Easy configuration, no PC required
•
Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast etc.)
•
Advanced 128-bit AES encrypted transmission and PoE+ power technology
•
Built-in transient protection; Industrial temperature range
•
Available in 1-4 device Eo2TM System Kits
•
Limited lifetime warranty
The NVT Phybridge Model NV-EC1701U Eo2TM Ethernet over 2-Wire Transceiver is a
compact media converter that allows 10/100 BaseT Ethernet and PoE power to be transmitted
using UTP, STP,18/2, or similar cable. These devices are often used in legacy installations
where existing wire is re-used as part of an upgrade to IP devices. 55VDC class 2 power is
delivered to one transceiver, which distributes it to up to four remote transceivers, and their
PoE or PoE+ devices.
These transceivers are extremely simple to use, with no PC configuration required. Status
LEDs indicate power and link connectivity/activity for RJ45 and 2-wire ports. The NV-EC1701U
is backed by NVTP’s award winning customer support and limited lifetime warranty.
*Distance and number of devices supported may be lower due to attenuation/voltage-drop on the wire. See Wire Distance charts on page 9.
Complete Installation Guide
Model NV-EC1701U
EoC Ethernet over Coax Transceiver
with PoE, PoE+, or High Power PoE
PRODUCT OVERVIEW
