background image

Page 14 of 14

888.901.3633 | +44 (0) 208 977 6614

www.nvtphybridge.com

Copyright © 2017 NVT Phybridge

2017/11

TROUBLESHOOTING

PRODUCT DESCRIPTION

Confirm that the NVTP transceivers have been configured 

to communicate with each other, per instructions on 

page 3.

If you are experiencing problems, attempt to simplify 

your  setup.  Test  each  cable  segment  separately.  For 

example, test the IP camera directly at the ethernet 

switch without other equipment. Then add in the NVTP 

transceivers, back-to-back. Test each segment of a long 

cable- run independently. Attempt to isolate the problem.
Most IP camera installation problems involve configuring 

the IP camera and the recorder to recognize each other. 

If in doubt, connect the camera directly to the Ethernet 

switch, bypassing the transceivers.

Consult the IP camera and/or recorder installation 

manuals  for  configuration  instructions,  or  contact  the 

camera or recorder manufacturer.

The NVT Phybridge Model NV-EC1701U Ethernet over 

2-wire Transceiver is a compact media converter that 

allows 10/100 BaseT Ethernet and PoE, PoE+, or high-

power PoE to be transmitted using 2-wire cable. These 

devices are typically used in legacy installations where 

existing cable is redeployed as part of an upgrade to 

IP  cameras.  48-55VDC  class  2  power  is  delivered  to 

one transceiver, which distributes it to multiple remote 

transceivers, and their PoE cameras (or other IP 

devices).

These transceivers are extremely simple to use, with no 

IP or MAC address configuration required. Status LEDs 

indicate power and link connectivity/activity for RJ45 and 

BNC ports.

NETWORK DIAGNOSTIC TOOLS

NVT Phybridge has developed a Console Utility that 

can be downloaded from www.nvtphybridge.com. Once 

installed on any Windows PC, the application scours 

the network for NVTP devices, and reports each of their 

MAC addresses, as well as the MAC addresses of any 

other NVTP devices within its joined group.
Additional  network  tools,  such  as  Packet  Sniffers  or 

Traffic generators are available from other sources such 

as LAN Shark, LANTraffic, etc.

CUSTOMER SUPPORT

NVT Phybridge customer support is available for 

consultation  from  6:00AM  -  7:00PM  EST  Monday 

through  Friday.  In  addition,  emergency  after  hours 

callback support is available.

Corporate Headquarters: +1 (888) 901-3633

Corporate Headquarters Fax : +1 (866) 252-9148

UK European Headquarters: (+44) (0)20 8977 6614

Email Headquarters: [email protected]

Email UK European Headquarters: [email protected]

Web Home Page: www.nvtphybridge.com

PRODUCT RETURNS

Please  call  before  returning  units  to  NVT  Phybridge. 

Returned materials must have a “Returned Materials 

Authorization”  (RMA)  number  from  NVT  Phybrigde 

marked on the outside of the shipping carton.

Complete Installation Guide

Model NV-EC1701U

EoC Ethernet over Coax Transceiver

with PoE, PoE+, or High Power PoE

COMPLIANCE AND AGENCY APPROVALS

All the compliance information is available on our website 

www.nvtphybridge.com.

WARRANTY

The NV-EC1701U is backed by NVT Phybridge’s award

winning customer support and limited lifetime warranty.

Summary of Contents for NV-EC1701U















Reviews: