NVIDIA Corporation
59
Chapter 4
Using nView Multi-Display Settings
3
Depending on whether you have Horizontal or Vertical Span mode enabled, you
can drag your active windows, images, or icons horizontally or vertically to move
them to the secondary display.
show the primary display is designated by a and
the secondary display is designated by b. Both display are identified with the
same number — 1 in this case (can also be another Windows display number,
depending on your configuration) — because in nView Span mode, Windows
doesn’t treat the primary and secondary displays as two separate displays.
(For details on this concept, see the section
“nView Span Modes vs. Dualview
.) From the Windows Display Properties Settings
tab, if you click
Identify
when you are in nView Span mode, you will see the
same number displayed on each of your active displays.
Figure 4.13
nView Vertical Span Mode — Windows XP
nViewGuide_.book Page 59 Thursday, September 14, 2006 1:14 PM
