21
1.
2.
3.
4.
5.
OCP 3.0 Adapter Card Installation Instructions
This section provides detailed instructions on how to install your adapter card in a system.
The OCP
3.0 adapter card is shipped assembled either with an internal-lock, a pull-tab (thumbscrew), or an
ejector-latch bracket. Follow the below instructions depending on the card you have purchased.
Before installing the card, make sure that the system is off and the power cord is not
connected to the server. Please follow proper electrical grounding procedures.
Open the system case.
Align the card with the system rails.
Internal Lock Bracket
Pull-tab (Thumbscrew)
Bracket
Ejector-Latch Bracket
Push the card until connectors are in a full mate.
Internal Lock Bracket
Pull-tab (Thumbscrew)
Bracket
Ejector-Latch Bracket
Secure the card.
Internal Lock Bracket
Pull-tab (Thumbscrew)
Bracket
Ejector-Latch Bracket
A clicking sound is heard
once
the connectors are in a full
mate.
Turn the captive screw clockwise
until firmly locked.
Close the ejector.
The following figures are for illustration purposes only.
