Nvidia DGX-1 User Manual Download

Page: 110 / 120

Safety

www.nvidia.com

NVIDIA DGX-1

DU-08033-001 _v13.1 | 106

‣

The power cord must have safety ground pin or contact that is suitable for the

electrical outlet.

‣

The power supply cord(s) is/are the main disconnect device to AC power.

‣

The socket outlet(s) must be near the equipment and readily accessible for

disconnection.

‣

The power supply cord(s) must be plugged into socket-outlet(s) that is /are provided

with a suitable earth ground.

8.6. System Access Warnings

Caution

: To avoid personal injury or property damage, the following safety instructions

apply whenever accessing the inside of the product:

‣

Turn off all peripheral devices connected to this product.

‣

Turn off the system by pressing the power button to off.

‣

Disconnect the AC power by unplugging all AC power cords from the system or

wall outlet.

‣

Disconnect all cables and telecommunication lines that are connected to the system.

‣

Retain all screws or other fasteners when removing access cover(s). Upon

completion of accessing inside the product, refasten access cover with original

screws or fasteners.

‣

Do not access the inside of the power supply. There are no serviceable parts in the

power supply. Return to manufacturer for servicing.

‣

Power down the server and disconnect all power cords before adding or replacing

any non hot-plug component.

‣

When replacing a hot-plug power supply, unplug the power cord to the power

supply being replaced before removing the power supply from the server.

Caution

: If the server has been running, any installed processor(s) and heat sink(s) may

be hot.
Unless you are adding or removing a hot-plug component, allow the system to cool

before opening the covers. To avoid the possibility of coming into contact with hot

component(s) during a hot-plug installation, be careful when removing or installing the

hot-plug component(s).

Caution:

To avoid injury do not contact moving fan blades. Your system is supplied with

a guard over the fan, do not operate the system without the fan guard in place.

8.7. Rack Mount Warnings

Note

: The following installation guidelines are required by UL for maintaining safety compliance

when installing your system into a rack.

The equipment rack must be anchored to an unmovable support to prevent it from

tipping when a server or piece of equipment is extended from it. The equipment rack

must be installed according to the rack manufacturer's instructions.

Summary of Contents for DGX-1

























































































































Search results

Summary of Contents for DGX-1

Reviews:

Related manuals for DGX-1

Brands by name

Popular brands

Nvidia DGX-1, User Manual

Search results

Summary of Contents for DGX-1

Reviews:

Related manuals for DGX-1

Brands by name

Popular brands