Nvidia DGX-1 User Manual Download

Page: 103 / 120

www.nvidia.com

NVIDIA DGX-1

DU-08033-001 _v13.1 | 99

Chapter 6.

INSTALLING SOFTWARE ON AIR-GAPPED

NVIDIA DGX-1 SYSTEMS

For security purposes, some installations require that systems be isolated from the

internet or outside networks. Since most DGX-1 software updates are accomplished

through an over-the-network process with NVIDIA servers, this section explains how

updates can be made when using an over-the-network method is not an option. It

includes a process for installing Docker containers as well.

6.1. Installing NVIDIA DGX-1 Software

One method for updating DGX-1 software on an air-gapped DGX-1 is to download the

ISO image, copy it to removable media and then re-image the DGX-1 from the media.

This method is available only for software versions that are available as ISO images for

download.
Alternately, you can update the DGX-1 software by performing a network update from a

local repository. This method is available only for software versions that are available for

over-the-network updates.

6.1.1. Re-Imaging the System

WARNING:

This process destroys all data and software customizations that you have

made on the DGX-1. Be sure to back up any data that you want to preserve, and push
any Docker images that you want to keep to a trusted registry.

Obtain the ISO image from the Enterprise Support site.
a) Log on to the

NVIDIA Enterprise Services (https://nvid.nvidia.com/

enterpriselogin/)

site and click the Announcements tab to locate the DGX-1 Base

OS Image ISO file.

b) Download the image ISO file.

Refer to the instructions in the

Restoring the DGX-1 Software Image

section for

additional instructions.

Summary of Contents for DGX-1

























































































































Search results

Summary of Contents for DGX-1

Reviews:

Related manuals for DGX-1

Brands by name

Popular brands

Nvidia DGX-1, User Manual

Search results

Summary of Contents for DGX-1

Reviews:

Related manuals for DGX-1

Brands by name

Popular brands