Nvidia ConnectX-6 Dx MCX623430MS-CDAB, User Manual

Page: 56 / 75

56
1.
2.
3.
4.
1.
2.
3.
4.
a.
b.
To install the driver:
Log into the ESXi server with root permissions.
Install the driver.
#> esxcli software vib install –d <path>/<bundle_file>
Example:
#> esxcli software vib install -d /tmp/MLNX-NATIVE-ESX-ConnectX- 4 -5_4. 16.8 . 8 -10EM- 650.0 . 0.4240417 .zip
Reboot the machine.
Verify the driver was installed successfully.
esxcli software vib list | grep nmlx
nmlx5-core
4.16 . 8.8 -1OEM. 650.0 . 0.4240417 MEL PartnerSupported 2017 - 01 - 31
nmlx5-rdma 4.16 . 8.8 -1OEM. 650.0 . 0.4240417 MEL PartnerSupported 2017 - 01 - 31
Removing Earlier NVIDIA Drivers
To remove all the drivers:
Log into the ESXi server with root permissions.
List all the existing NATIVE ESXi driver modules. (See Step 4 in Installing NVIDIA NATIVE ESXi
Driver for VMware vSphere. )
Remove each module:
#> esxcli software vib remove -n nmlx5-rdma
#> esxcli software vib remove -n nmlx5-core
Reboot the server.
Firmware Programming
Download the VMware bootable binary images from the NVIDIA Firmware Tools (MFT)
site .
Install the image according to the steps described in the MFT User Manual .
After the installation process, all kernel modules are loaded automatically upon boot.

Please unload the previously installed drivers before removing them.

To remove the modules, you must run the command in the same order as shown in
the example above.

The following procedure requires custom boot image downloading, mounting
and booting from a USB device.
