14
8. The display device selected “
3DForce2 MX
series, nVIDIA GeForce2 MX
”, then press on
OK button.
9. Close and apply to finish AGP’s display driver
installation.
ÿ
ÿ
Microsoft NT™4.0
To proceeding the video display driver installation, you
may process the setup of service pack3 or above
versions (Microsoft® Windows NT™4.0) first.
1. SELECT the “Display” icon in control panel and then
SELECT the “Settings” page.
2. SELECT “Display Type...” button in the “Settings” page.
3. SELECT “Change...” button from the Adapter type
section.
4. SELECT “Have Disk...” button from the Change Display
page.
5. Microsoft Windows NT 4.0 will prompt you for the correct
path where the video drivers are located. ENTER the
path “X:\MX\Winnt4\” where X: is the CD ROM drive
where the Software & Documents CD has been inserted.
6. If the driver “
3DForce2 MX series
,
nVIDIA GeForce2
MX
” is listed under the Display list, SELECT the “OK”
button to continue.
7. Once the driver files are copied, RESTART Microsoft
Windows NT 4.0 for the changes to take effect.
8. SELECT the desired color palette (the number of colors),
desktop area (resolution), and refresh frequency in the
settings page of Display Properties and then SELECT the
“Test” button in the same page to determine whether your
selection works properly. SELECT “Apply” to active the
selected mode.
9. Re-start Windows if necessary.
