11
Software Installation
Software Installation
ÿ
Microsoft Windows®9x
New system installation:
When the Microsoft Windows® PnP(Plug-and-Play)
detected on the new hardware, click on
[Cancel]
button
to allow the operating system starting with the VGA or
SVGA driver.
Do Not
placed the 3DForce2 MX’CD into
the CD ROM drive. After Windows®9x desktop loaded
completely, following the video driver installation
procedure below.
1. Insert the software’ CD into your CD-ROM drive
(e.g. D: or E:).
2. Autorun file pops up “Welcome” screen from
software’ CD.
3. Click on the “Display Driver” selection bar.
4. Switch to “Settings” tab, then click on “ Advance”
button.
5. Tab on “Adapter” screen, if there is any.
6. Click on “Change”, then “Have Disk”.
7. Browse to “X:\MX\Win9x\Jatonagp.INF” (X is the
letter of your CD-ROM drive; typically, D: or E:,
etc.), and click OK.
8. The display device selected “
3DForce2 MX
series, nVIDIA GeForce2 MX
”, then press on
OK button.
9. Close and apply to finish AGP’s display driver
installation.
10. Restart Windows to complete installation.
