3
Hardware Installation
Locate the AGP bus expansion slot on your system
mainboard and remove the cover if there is one.
If there is an existing VGA card, remove the old
card by loosening the mounting bracket and pulling
the card off the slot.
OR
Step
2
Remove the
old card
System mainboard
AGP
slot
AGP slot
Position the new card over the AGP slot. Insert the bus connector in the slot and
gently press the bus connector down.
Step
3
I
NSERTING YOUR CARD INTO
THE WRONG TYPE OF SLOT
CAN DAMAGE YOUR CARD
,
YOUR COMPUTER
,
OR BOTH
.
I
NSERTING YOUR CARD INTO
THE WRONG TYPE OF SLOT
CAN DAMAGE YOUR CARD
,
YOUR COMPUTER
,
OR BOTH
.
Shut down the computer; unplug all the cables and
electrical cords; and remove the cover from the
computer chassis.
Step
1
