© 2018 nVent
89091001
- 16 -
Enter the Class-C network subnet that contains the new air conditioners in dotted format and click
on the “Start” button. The last digit should be a “0” (zero). Any new air conditioner found will be
added to the configuration.
Note: You must save the configuration file to make the new air conditioners permanent.
Note: With the default network configuration, it takes approximately 4 seconds to poll
each possible IP address when looking for new air conditioners. There are 254 possible IP
addresses on a subnet, so it will take more than 15 minutes to scan a complete subnet. You
can reduce the default IP Retries to 1 by clicking on the down-arrow next to the IP Retries box,
and reduce the default IP Time out to shorten the scanning time.
Note: A future version of this application will allow the use of an arbitrary subnet mask.
Note: In a Master/Slave configuration the Master ACU is the only ACU connected to the
network. The Master ACU will be added to the configuration, but the Slaves will not be added.
The Slave ACUs will need to be manually added to the configuration.
4.2 Manually adding an air conditioner to the configuration
Click the “Tools” menu and select “Change Multiple ACU Configuration” from the pull-down menu.
