16 | nVent.com
7.3.4 TEMPERATURE SCALE
The Temperature scale settings provide the possibility to
limit the minimum and maximum settable temperature in
the working modes (Event Mode, Constant Mode or Boost
Mode).
7.3.5 BACKLIGHT
You can define how the backlight (blue light) of the
NRG-DM is reacting.
There are 3 possible settings:
• Auto
The backlight is deactivated after 30 seconds of
inactivity
• On heat
The backlight lights up every time the thermostat is
heating
• Constant On
The back light does not go off
7.3.6 SENSOR
In the Sensor setting, you select the type of sensor that is
installed. The possible sensors are:
•
Factory = sensor delivered with the NRG-DM =
OºWIRWSV
•
NRG-Temp = sensor of the NRG-Temp or Green Leaf
XLIVQSWXEX!OºWIRWSV
•
OºWIRWSV
•
OºWIRWSV
•
OºWIRWSV
•
OºWIRWSV
•
OºWIRWSV
With the exception of the Factory sensor and the NRG-
Temp sensor, you will be asked to give reference points of
your sensor at 15, 20, 25 & 30°C. If you do not have these
reference points of the sensor, the NRG-DM is proposing
you a standard calibration of the sensor. This might not be
100% accurate but will be close to the real values.
