5
Player Portfolio Audio System
| Product Manual
PRODUCT FEATURES
NV-P3100-XX 3-ZONE PLAYER (ETHERNET)
FRONT PANEL
1
4
3
2
Item
Name
Description
1
Standby LED Indicator
Indicates if the player is on, in active mode, or in standby mode
2
Zone 1 LED Indicator
Indicates the status of Zone 1
3
Zone 2 LED Indicator
Indicates the status of Zone 2
4
Zone 3 LED Indicator
Indicates the status of Zone 3
BACK PANEL
1
2
5
3
6
4
7 8
9
Item
Name
Description
1
Ethernet
RJ45 ports for a wired connection to a network router. Use one port for connection
NOTE:
It is not recommended to daisy-chain connectors to other devices. Each unit requires an individual
connection to a router or switch.
2
Speaker Outputs*
Speaker connection ports. Each zone represents an independent output
3
Line In
3.5mm stereo analog line-level input port. Each zone represents an independent input
4
Trigger In
Optional input for a 3-12 volt input trigger (possible use with a future firmware release)
5
Line Out*
3.5mm stereo analog line-level output port. Each zone represents an independent output
6
Trigger Out
3.5mm output voltage (5 V, 20 mA) trigger for external equipment. Turns on external amp when
audio is present on zone
7
USB**
USB connection port for sharing music content from a storage device. Each zone represents an
independent input
8
Setup
Used for each of the zone sections in the setup process to associate the zone control with the
network
9
AC
Universal AC power supply connection port
* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more
player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
