1
6
7
8
3
2
4
Back Panel Features
1. Audio Source Input A
:
The D460 will accept any line level stereo audio signal. This can be from the preamp lineout of a multi-source,
multi-zone whole house system such as the NuVo Simplese, Essentia E6G and Grand Concerto systems, or the audio output of any non-amplified
source, such as an AM/FM tuner, CD player, or Satellite receiver.
2. Sensitivity Gain Control A:
Left and Right Channel Sensitivity trim pots allow the incoming signal to be increased or decreased to
maximize the potential output of the audio source.
3. Power Mode A:
This switch dictates how the amplifier responds to external triggers. The D460 has 3 trigger methods: incoming audio
signal, external voltage input, or the power button on the front of the amplifier.
4. Unit On A:
This provides a 12V trigger output when the amplifier is powered on. This can be used to turn on external audio equipment,
daisy chain multiple external amplifiers, or trigger a relay switching power strip.
5. Trigger In A:
This voltage trigger input allows the D460 to power up whenever a voltage of 3-30 volts AC or DC is present.
6. Audio Source Input B
:
The D460 will accept any line level stereo audio signal. This can be from the preamp lineout of a multi-source,
multi-zone whole house system such as the NuVo Simplese, Essentia E6G and Grand Concerto systems, or the audio output of any non-amplified
source, such as an AM/FM tuner, CD player, or Satellite receiver.
7. Sensitivity Gain Control B:
Left and Right Channel Sensitivity trim pots allow the incoming signal to be increased or decreased to
maximize the potential output of the audio source.
8. Power Mode B:
This switch dictates how the amplifier responds to external triggers. The D460 has 3 trigger methods: incoming audio
signal, external voltage input, or the power button on the front of the amplifier.
9. Unit On B:
This provides a 12V trigger output when the amplifier is powered on. This can be used to turn on external audio equipment,
daisy chain multiple external amplifiers, or trigger a relay switching power strip.
10. Trigger In B:
This voltage trigger input allows the D460 to power up whenever a voltage of 3-30 volts AC or DC is present.
11. Speaker Impedance:
This switch sets the impedance stability at either 4 or 8 ohms.
12. Speaker Output A:
The speaker output attaches to the amplifier via a modular plug and provides 60 watts per channel output at
either 4 or 8 ohms.
13. Speaker Output B:
The speaker output attaches to the amplifier via a modular plug and provides 60 watts per channel output at
either 4 or 8 ohms.
14. AC Power:
The D460 is designed to plug into any AC power source.
8
5
13
12
11
9
14
10