I. Audio Source Inputs
The D460 amplifier features dual stereo RCA audio inputs designed to accept a line level audio signal. Most audio equipment is equipped with a
stereo RCA output that allows the audio signal to be taken directly to the D460’s audio input. This is accomplished using a standard stereo audio
cable with left and right audio jacks on each end (Fig. 1).
Fig. 1
The D460 is a great complement to any NuVo Multi Room Audio System, where extra amplification may be desired for a particular zone. Zone 4 on
the Simplese audio system has a fixed and variable RCA stereo audio output. Zones 1 & 2 on the Essentia E6G have fixed and variable 3.5mm stereo
audio outputs, and all zones on the Grand Concerto have fixed and variable 3.5mm stereo audio outputs. To add the D460 to one of these systems,
use a 3.5mm to Stereo RCA adapter cable to pass the audio signal from the NuVo Grand Concerto or Essentia E6G to the D460. Connect the 3.5mm
end into the variable 3.5mm output for the chosen zone (Fig. 2) on the Grand Concerto or Essentia E6G, and connect the left and right RCA’s into the
input on the D460. For the Simplese system use a standard stereo RCA patch cable to connect the Simplese to the D460.
Fig. 2
10
5
6
FIXED
VAR
ZONE
1
ZONE
2
TUNER B
ANTENNA INPUT
IN
USE ONLY NuVo
NV-T2PAS
POWERED ANTENNA SYSTEM
L
AUDIO OUT
AUX IN
R
TRIGGER
ON=+12V
AUDIO
OUTPUT