Nuvo NV-D460 Installation Manual Download Page 3

ENGLISH

1.  Read all safety and operating instructions before using this product.
2.  All safety and operating instructions should be kept for future 

reference.

3. Read and understand all warnings listed on the operating 

instructions.

4 . Follow all operating instructions to operate this product..
5.  This product should not be used near water, i.e. bathtub, sink, 

swimming pool, wet basement, etc.

6.  Only use dry cloth to clean this product.
7.  Do not block any ventilation openings, It should not be placed flat 

against a wall or placed in a built-in enclosure that will impede the 
flow of cooling air.

8.  Do not install this product near any heat sources ; such as, radiators, 

heat registers, stove or other apparatus (including heat producing 
amplifiers) that produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-type 

plug. A polarized plug has two blades with one wider than the other. 
A grounding-type plug has two blades and a third grounding prong. 
The wide blade or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10. Protect the power cord being walked on or pinched, particularly at 

plugs, convenience receptacles and the point where they exit from 
the apparatus. Do not break the ground pin of the power supply 
cord.

11 . Only use attachments specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by 

the manufacturer or sold with the apparatus. When a cart is used, 
use caution when moving cart/apparatus combination to avoid 
injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for 

long periods of time.

14. Care should be taken so that objects do not fall and liquids are not 

spilled into the unit through the ventilation ports or any other 
openings.

15. Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way; such 
as, power-supply cord or plug is damaged, liquid has been spilled or 
objects have fallen into the apparatus, the apparatus has been 

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for NV-D460

















Reviews: