CLEANING AND DISINFECTING
Remove all accessories (including nebuliser, mask, mouthpiece, connector, outer
cover) from the device after each use.
Open the cover of nebuliser and remove the residual liquid. You are advised,
after each use, to allow the device running with clean water instead of liquid for
1-2 minutes in order to clean the nebulising head. Clean the mask, mouthpiece,
connector, outer cover, and nebuliser gently (Note that the main unit should not be
washed).
Immediately after completion of cleaning, dry the accessories with medical gauze.
Note that the metal mesh in nebulising head must not be touched strongly any
sharp and rough object. Dry the water inlet and outlet of the nebulising head with
medial swab gently.
If there is dust on the surface of main unit, please wipe it up with wet and dry gauge
successively.
After completion of cleaning, store the device in clean storage bag.
1.
2.
3.
4.
5.
Cleaning
Rinse the mask, mouthpiece, connector and outer cover with medical alcohol (not
including the MESH HEAD); rinse with water; dry with medical gauze.
Disinfecting the nebulising head: gently clean the metal mesh and electrode in
the nebulising head with a medical swab dipped with medical alcohol; rinse the
nebulising head with water; dry the surface of nebulising head with medical swab as
soon as possible by patting action.
Boiling disinfection for the following accessories:
Mouthpiece, connector and outer cover: put in a boiling steriliser with sufficient
water to ensure they are completely submerged; heating the water to boiling point
(for 20 minutes in total); dry them with medial gauze.
Boiling Disinfection must NOT be used for the following parts:
Nebuliser, nebulising head, main unit, mask, power adapter, storage bag, and
packaging bag.
1.
2.
3.
4.
Disinfecting
Make sure there is no residual liquid in nebuliser.
Make sure the nebuliser has been cleaned and sterilised thoroughly after each use.
Store the device and its parts. Components, and accessories in a clean and safe place.
Protect the device against direct sunshine and shock. Remember to keep any
heating device and open fire far away from the storage place.
Protect the device against contact with any corrosive liquid.
Never dry the device and its parts and components in a microwave oven.
Never wrap any power cord around the main unit.
•
•
•
•
•
•
•
STORAGE AND MAINTENANCE
